This contribution contains the 3D model(s) described and figured in the following publication: The present 3D Dataset contains the 3D models and CT-Scan slices of the lower jaws and teeth analyzed in “A new prozostrodontian cynodont (Eucynodontia, Probainognathia) from the Upper Triassic of southern Brazil”. https://doi.org/10.1080/02724634.2020.1782415 

Agudotherium gassenae CAPPA/UFSM 0262 View specimen

	M3#546 Left lower jaw and cheek teeth Type: "3D_surfaces" doi: 10.18563/m3.sf.546   state:published	Download 3D surface file
	M3#547 1578 slices Type: "3D_CT" doi: 10.18563/m3.sf.547   state:published	Download CT data

Agudotherium gassenae CAPPA/UFSM 0208 View specimen

	M3#548 right lower jaw Type: "3D_surfaces" doi: 10.18563/m3.sf.548   state:published	Download 3D surface file
	M3#549 CT data of CAPPA_UFSM_0208 Type: "3D_CT" doi: 10.18563/m3.sf.549   state:published	Download CT data

The present 3D Dataset contains the 3D model of a left dentary with m1-m3 analyzed in “A new fossil of Tayassuidae (Mammalia: Certartiodactyla) from the Pleistocene of northern Brazil”. The 3D model was generated using a laser scanning. 

cf. Pecari tajacu UFSM 11606 View specimen

M3#498 Left dentary with m1-m3 Type: "3D_surfaces" doi: 10.18563/m3.sf.498   state:published

Download 3D surface file

The presented dataset contains the 3D surface scan of the holotype of Birgeria americana, a partial skull described and depicted in: Romano, C., Jenks, J.F., Jattiot, R., Scheyer, T.M., Bylund, K.G. & Bucher, H. 2017. Marine Early Triassic Actinopterygii from Elko County (Nevada, USA): implications for the Smithian equatorial vertebrate eclipse. Journal of Paleontology. https://doi.org/10.1017/jpa.2017.36 . 

Birgeria americana NMMNH P-66225 View specimen

M3#175 NMMNH P-66225 is from upper lower Smithian to lower upper Smithian beds (Thaynes Group). The collecting site is located about 2.75 km south-southeast of the Winecup Ranch, east-central Elko County, Nevada, USA. P-66225 is a partial skull preserved within a large limestone nodule, with its right side exposed. It preserves the portion between the cleithrum posteriorly, and the level of the hind margin of the orbital opening anteriorly. The fossil has a length of 26 cm. Type: "3D_surfaces" doi: 10.18563/m3.sf.175   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model used in in the following publication: Interacting with the inaccessible: utilization of multimedia-based visual contents of Japan’s National Monument, the Taniwhasaurus mikasaensis (Mosasauridae) holotype for educational workshops at Mikasa City Museum. 

Taniwhasaurus mikasaensis MCM.M0009 View specimen

M3#499 Taniwhasaurus mikasaensis, Caldwell et al. 2008 Type: "3D_surfaces" doi: 10.18563/m3.sf.499   state:published

Download 3D surface file

The present 3D Dataset contains the 3D model of the brain endocast of Neoepiblema acreensis analyzed in “Small within the largest: Brain size and anatomy of the extinct Neoepiblema acreensis, a giant rodent from the Neotropics”. The 3D model was generated using CT-Scanning and techniques of virtual reconstruction.
  

Neoepiblema acreensis UFAC 4515 View specimen

M3#502 Brain endocast of Neoepiblema acreensis Type: "3D_surfaces" doi: 10.18563/m3.sf.502   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models of the brain endocast analyzed in “Virtual brain endocast of Antifer (Mammalia: Cervidae), an extinct large cervid from South America”. 

Antifer ensenadensis U-4922 View specimen

M3#550 Brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.550   state:published

Download 3D surface file

Antifer ensenadensis MCN-PV 943 View specimen

M3#551 Brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.551   state:published

Download 3D surface file

This contribution contains the 3D model of the fossil talus of a small-bodied anthropoid primate (Platyrrhini, Cebidae, Cebinae) discovered from lower Miocene deposits of Peruvian Amazonia (MD-61 locality, Upper Madre de Dios Basin). This fossil was described and figured in the following publication: Marivaux et al. (2012), A platyrrhine talus from the early Miocene of Peru (Amazonian Madre de Dios Sub-Andean Zone). Journal of Human Evolution.  http://dx.doi.org/10.1016/j.jhevol.2012.07.005  

Cebinae indet. sp. MUSM-2024 View specimen

M3#380 Right talus 3D surface of a Miocene Cebinae indet. primate Type: "3D_surfaces" doi: 10.18563/m3.sf.380   state:published

Download 3D surface file

This contribution contains the 3D model described and figured in the following publication: Crochet, J.-Y., Hautier, L., Lehmann, T., 2015. A pangolin (Manidae, Pholidota, Mammalia) from the French Quercy phosphorites (Pech du Fraysse, Saint-Projet, Tarn-et-Garonne, late Oligocene, MP 28). Palaeovertebrata 39(2)-e4. doi: 10.18563/pv.39.2.e4  

Necromanis franconica UM PFY 4051 View specimen

M3#12 A partial left humerus from Pech du Fraysse (Saint-Projet, Tarn-et-Garonne, France), MP 28 (late Oligocene) Type: "3D_surfaces" doi: 10.18563/m3.sf12   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models analyzed in the following publication: Georgalis, G. L., and T. M. Scheyer. A new species of Palaeopython (Serpentes) and other extinct squamates from the Eocene of Dielsdorf (Zurich, Switzerland). Swiss Journal of Geosciences (in press). https://doi.org/10.1007/s00015-019-00341-6

  

Palaeopython helveticus PIMUZ A/III 631 View specimen

	M3#399 ZIP file containing .ply of vertebra PIMUZ A/III 631 from Palaeopython helveticus n. sp. Type: "3D_surfaces" doi: 10.18563/m3.sf.399   state:published	Download 3D surface file
	M3#403 dataset of snake vertebra PIMUZ A/III 631 Type: "3D_CT" doi: 10.18563/m3.sf.403   state:published	Download CT data

Palaeopython helveticus PIMUZ A/III 634 View specimen

	M3#400 ZIP file containing .ply of vertebra PIMUZ A/III 634 from Palaeopython helveticus n. sp. (holotype) Type: "3D_surfaces" doi: 10.18563/m3.sf.400   state:published	Download 3D surface file
	M3#404 dataset of snake vertbra PIMUZ A/III 634 (holotype) Type: "3D_CT" doi: 10.18563/m3.sf.404   state:published	Download CT data

Palaeopython helveticus PIMUZ A/III 636 View specimen

	M3#401 ZIP file containing .ply of vertebra PIMUZ A/III 636 from Palaeopython helveticus n. sp. Type: "3D_surfaces" doi: 10.18563/m3.sf.401   state:published	Download 3D surface file
	M3#406 dataset of snake vertebra PIMUZ A/III 636 Type: "3D_CT" doi: 10.18563/m3.sf.406   state:published	Download CT data

Palaeovaranus sp. PIMUZ A/III 234 View specimen

	M3#402 ZIP file containing .ply of dentary PIMUZ A/III 234 of Palaeovaranus sp. Type: "3D_surfaces" doi: 10.18563/m3.sf.402   state:published	Download 3D surface file
	M3#405 dataset of dentary of Palaeovaranus sp. (PIMUZ A/III 234) Type: "3D_CT" doi: 10.18563/m3.sf.405   state:published	Download CT data

The present 3D Dataset contains the 3D models analyzed in Pochat-Cottilloux Y., Martin J.E., Jouve S., Perrichon G., Adrien J., Salaviale C., de Muizon C., Cespedes R. & Amiot R. (2021). The neuroanatomy of Zulmasuchus querejazus (Crocodylomorpha, Sebecidae) and its implications for the paleoecology of sebecosuchians. The Anatomical Record, https://doi.org/10.1002/ar.24826 

Zulmasuchus querejazus MHNC 6672 View specimen

	M3#798 Left endosseous labyrinth of Z. querejazus (MHNC 6672). Type: "3D_surfaces" doi: 10.18563/m3.sf.798   state:published	Download 3D surface file
	M3#799 Reconstruction of the endocranial cavities of Z. querejazus (MHNC 6672). Type: "3D_surfaces" doi: 10.18563/m3.sf.799   state:published	Download 3D surface file
	M3#800 Three-dimensional reconstruction of the pneumatic cavities within the braincase of Z. querejazus (MHNC 6672) Type: "3D_surfaces" doi: 10.18563/m3.sf.800   state:published	Download 3D surface file

The present 3D Dataset contains the 3D models of an ilium, a vertebra, and a partial scapula of Prestosuchus sp. that were analyzed in “New Loricata remains from the Pinheiros-Chiniquá Sequence (Middle-Upper Triassic), southern Brazil”. 

Prestosuchus sp. UFSM11603 View specimen

M3#1080 Surface scan of a right ilium of Prestosuchus sp. with a 0.4 mm resolution. Type: "3D_surfaces" doi: 10.18563/m3.sf.1080   state:published

Download 3D surface file

Prestosuchus sp. UFSM11233 View specimen

M3#1081 Surface scan of a partial right scapula of Prestosuchus sp. with a 0.4mm resolution. Type: "3D_surfaces" doi: 10.18563/m3.sf.1081   state:published

Download 3D surface file

Prestosuchus sp. UFSM11602a View specimen

M3#1082 Surface scan of a anterior dorsal vertebra of Prestosuchus sp. with a 0.2 mm resolution. Type: "3D_surfaces" doi: 10.18563/m3.sf.1082   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models of brain endocast of traversodontid cynodonts studied in: Pavanatto et al. 2019. Virtual reconstruction of cranial endocasts of traversodontid cynodonts (Eucynodontia: Gomphodontia) from the upper Triassic of Southern Brazil. Journal of Morphology. https://doi.org/10.1002/jmor.21029 

Siriusgnathus niemeyerorum CAPPA/UFSM 0032 View specimen

M3#425 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.425   state:published

Download 3D surface file

Exaeretodon riograndensis CAPPA/UFSM 0030 View specimen

M3#426 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.426   state:published

Download 3D surface file

Exaeretodon riograndensis CAPPA/UFSM 0227 View specimen

M3#427 3D model of the brain endocast Type: "3D_surfaces" doi: 10.18563/m3.sf.427   state:published

Download 3D surface file

The present 3D Dataset contains the 3D models produced in the frame of the article Perthuis, A. de, Mennecart, B., Barrier, P., Chenot, É., Falconnet, J., Gagnaison, J.-C., Georgalis, G. L., Gilbert, C., Guevel, B., Langevin, D., Lapparent de Broin, F. de, Lemierre, A., Maubert, F., Ossó, À., Potel, S., Thivaiou, D., Tissier, J., Toullec, R., Xerri, S., Gagnaison, C. 2025. Révision des données sédimentologiques et biostratigraphiques des gisements à vertébrés des sables de l’Orléanais, à Beaugency, Tavers et Le Bardon (Miocène Moyen ; Loiret, France). Geodiversitas 47 (12): 2-76. https://doi.org/10.5252/geodiversitas2025v47a12  

Bunolistriodon lockharti ULB-TAV-21 View specimen

M3#1837 Left upper M3 Type: "3D_surfaces" doi: 10.18563/m3.sf.1837   state:published

Download 3D surface file

Megamphicyon giganteus ULB-TAV-13 View specimen

M3#1531 Left first lower molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1531   state:published

Download 3D surface file

Hispanotherium matritense ULB-TAV-17 View specimen

M3#1532 Left first lower molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1532   state:published

Download 3D surface file

Plesiaceratherium lumiarense ULB-TAV-18 View specimen

M3#1533 Left third upper molar Type: "3D_surfaces" doi: 10.18563/m3.sf.1533   state:published

Download 3D surface file

Chelydropsis aff. sansaniensis ULB-TAV-23 View specimen

M3#1535 Cast of a skull Type: "3D_surfaces" doi: 10.18563/m3.sf.1535   state:published

Download 3D surface file

Ronzotherium romani ULB-TAV-4 View specimen

M3#1556 Right fourth upper premolar Type: "3D_surfaces" doi: 10.18563/m3.sf.1556   state:published

Download 3D surface file

Prodeinotherium bavaricum ULB-TAV-24 View specimen

M3#1557 left hemimandibule Type: "3D_surfaces" doi: 10.18563/m3.sf.1557   state:published

Download 3D surface file

In this contribution a third new species of the rare genus Burmesescorpiops Lourenço, 2016 is described. The discovery of this new element belonging to the family Palaeoeuscorpiidae Lourenço, 2003 and to the subfamily Archaeoscorpiopinae Lourenço, 2015 brings further elements to support the validity of the genus Burmesescorpiops. This generic group remains however, poorly speciose. This is the latest discovery of Burmesescorpiops wunpawng, the name is derived from the Kachin Hilltribe peoples who are indigenous to the area. The data provided here is a 3D surface. 

Burmesescorpiops wunpawng ps-gyi-01-25 View specimen

M3#1846 3d Surface Volume Type: "3D_surfaces" doi: 10.18563/m3.sf.1846   state:published

Download 3D surface file

Veterinary education often relies on cadaveric specimens, but there is increasing demand for alternatives due to limited resources and ethical considerations. To address this, we developed a 3D printed ‘explodable’ model of a dog cranium with detachable, magnetized cranial components      for teaching anatomy to students. This model was generated from a computed tomographic scan of a juvenile dog cranium for which cranial sutures were still partially open and segmented such that major cranial bones were isolated. All bones are printed at actual size and retain openings for cranial nerves and major vessels. This interactive model enhances anatomical education by supplying a hands-on tool that can be used either in the classroom setting or for independent learning and can be incorporated at the high school, college, or veterinary school level. It is currently being integrated into the first-year anatomy foundation course at Cornell University’s College of Veterinary Medicine. The model can be printed using any hobbyist or specialist 3D printer and we outline assembly instructions on how to attach magnets at prefabricated attachment points.      Using both digital and 3D printed resources, we hope to help to address current shortages of anatomical resources and      also      inspire future generations of practicing veterinarians by making anatomy more accessible and engaging.
  

Canis lupus familiaris CUHL 9 View specimen

	M3#1858 PLYs of the segmented cranial bones with pre-fabricated magnetic casings and shelves for assembly following 3D printing Type: "3D_surfaces" doi: 10.18563/m3.sf.1858   state:published	Download 3D surface file
	M3#1859 PLYs of the segmented cranial bones of the "BOTTOM" cranial component. Downloadable for additional learning opportunities for students Type: "3D_surfaces" doi: 10.18563/m3.sf.1859   state:published	Download 3D surface file

This contribution contains the 3D models described and figured in the following publication:Skull and Inner Ear Morphometrics in Sheep and Goats: Species and Breed Differentiation with Bioarchaeological Applications (Hemelsdael et al. submitted). The models include the external surface of a complete skull and inner ear of both a sheep (Ovis aries) and a goat (Capra hircus), generated from micro-CT scans. In the associated paper, we used 3D geometric morphometric data to assess inter and intra (i.e. between breeds) discrimination based on complete skulls, skull fragments and the semi-circular canals of the inner ear. 

Capra hircus Amp_1 View specimen

	M3#1806 Skull of the goat Amp_1 Type: "3D_surfaces" doi: 10.18563/m3.sf.1806   state:published	Download 3D surface file
	M3#1807 Inner ear of the goat Amp_1 Type: "3D_surfaces" doi: 10.18563/m3.sf.1807   state:published	Download 3D surface file

Ovis aries UM_RR_2331 View specimen

	M3#1808 Skull of the sheep UM_RR_2331 Type: "3D_surfaces" doi: 10.18563/m3.sf.1808   state:published	Download 3D surface file
	M3#1809 Inner ear of the sheep UM_RR_2331 Type: "3D_surfaces" doi: 10.18563/m3.sf.1809   state:published	Download 3D surface file

This contribution contains the 3D models described and figured in: Phylogenetic signal in anteater snout morphology: implications for interpreting rare vermilinguan fossils. Palaeobiodiversity and Palaeoenvironments. 

Indet indet VPPLT 977 View specimen

M3#1793 3D surface models of the cranium, nasal bone and cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1793   state:in_press

Download 3D surface file

Cyclopes didactylus M 1525 View specimen

M3#1794 3D models of the cranium and internal cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1794   state:in_press

Download 3D surface file

Cyclopes didactylus M 1571 View specimen

M3#1795 3D surface models of the cranium, nasal bone and cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1795   state:in_press

Download 3D surface file

Myrmecophaga tridactyla M 3023 View specimen

M3#1796 3D surface models of the cranium, nasal bone and cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1796   state:in_press

Download 3D surface file

Tamandua tetradactyla NHMUK 3.7.7.135 View specimen

M3#1797 3D models of the cranium and internal cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1797   state:in_press

Download 3D surface file

Tamandua tetradactyla NHMUK 4.7.4.90 View specimen

M3#1798 3D surface models of the cranium, nasal bone and cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1798   state:in_press

Download 3D surface file

Tamandua tetradactyla UM 788N View specimen

M3#1799 3D models of the cranium and internal cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1799   state:in_press

Download 3D surface file

Cyclopes didactylus MVZ 121210 View specimen

M3#1800 3D models of the cranium and internal cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1800   state:in_press

Download 3D surface file

Myrmecophaga tridactyla MVZ 112943 View specimen

M3#1801 3D models of the cranium and internal cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1801   state:in_press

Download 3D surface file

Myrmecophaga tridactyla MVZ 185238 View specimen

M3#1802 3D models of the cranium and internal cranial canals Type: "3D_surfaces" doi: 10.18563/m3.sf.1802   state:in_press

Download 3D surface file

This contribution contains the 3D models of the paratympanic sinus system, the endocast and the neurovascular bony canal of the maxilla, premaxilla and the jugal of Leidyosuchus canadensis and Stangerochampsa mccabei described and figured in the following publication: G. Donzé, G. Perrichon, P. Vincent, JE. Martin, 2026. Comparative endocranial traits in the crocodylians Leidyosuchus canadensis and Stangerochampsa mccabei from the upper Cretaceous of Alberta, Canada. Journal of Anatomy. 

Leidyosuchus canadensis TMP1986.221.1 View specimen

M3#1830 Skull, endocast, paratympanic sinuses, jugal and maxillary neurovascular canals, alveoli Type: "3D_surfaces" doi: 10.18563/m3.sf.1830   state:in_press

Download 3D surface file

Stangerochampsa mccabei TMP1986.61.1 View specimen

M3#1831 Skull, endocast, paratympanic sinuses, jugal and maxillary neurovascular canals, alveoli Type: "3D_surfaces" doi: 10.18563/m3.sf.1831   state:in_press

Download 3D surface file

Alligator mississipiensis OUVC 9761 View specimen

M3#1833 Skull, endocast, paratympanic sinuses, jugal and maxillary neurovascular canals, alveolies Type: "3D_surfaces" doi: 10.18563/m3.sf.1833   state:in_press

Download 3D surface file

Alligator sinensis NHMW-Zoo-HS-37966 View specimen

M3#1835 Skull, endocast, paratympanic sinus, jugal and maxillary neurovascular canals, alveoli Type: "3D_surfaces" doi: 10.18563/m3.sf.1835   state:in_press

Download 3D surface file

Crocodylus niloticus MHNL 50001399 View specimen

M3#1834 Skull, endocast, paratympanic sinuses, jugal and maxillary neurovascular canals, alveolies Type: "3D_surfaces" doi: 10.18563/m3.sf.1834   state:in_press

Download 3D surface file

Diplocynodon ratelii LA86 View specimen

M3#1832 Skull, endocast, paratympanic sinus, jugal and maxillary neurovascular canals, alveolies Type: "3D_surfaces" doi: 10.18563/m3.sf.1832   state:in_press

Download 3D surface file