Current issue


2024-12
Volume 10, issue 04
<< prev. next >>
ISSN: 2274-0422

Article Management

You must log in to submit or manage articles.

You do not have an account yet ? Sign up.

Most downloaded articles (last year)


Page 2 of 10, showing 20 record(s) out of 190 total

3D models related to the publication: Comparative anatomy of the vocal apparatus in bats and implication for the diversity of laryngeal echolocation.
Nicolas L. M. Brualla Logo, Laura A. B. Wilson Logo, Vuong T. Tu Logo, Richard . Carter Logo and Daisuke Koyabu Logo
Published online: 28/06/2024

Keywords: Chiroptera; larynx; mammalian nasopharyngeal morphology; vocal tract; x-ray microtomography

https://doi.org/10.18563/journal.m3.219

  Abstract

    The present 3D Dataset contains the 3D models analyzed in Brualla et al., 2024: Comparative anatomy of the vocal apparatus in bats and implication for the diversity of laryngeal echolocation. Zoological Journal of the Linnean Society, vol. zlad180. (https://doi.org/10.1093/zoolinnean/zlad180). Bat larynges are understudied in the previous anatomical studies. The description and comparison of the different morphological traits might provide important proxies to investigate the evolutionary origin of laryngeal echolocation in bats. 

  Specimens
 
  M3 article infos

Published in Volume 10, issue 02 (2024)

PDF
3D models related to the publication: Springhares, flying and flightless scaly-tailed squirrels (Anomaluromorpha, Rodentia) are the squirrely mouse: comparative anatomy of the masticatory musculature and its implications on the evolution of hystricomorphy in rodents
 
Léa Da Cunha Logo, Pierre-Henri Fabre Logo and Lionel Hautier Logo
Published online: 05/07/2024

Keywords: anatomy; Anomaluromorpha; hystricomorphy; masticatory muscles

https://doi.org/10.18563/journal.m3.235

  Abstract

    This contribution contains the 3D model(s) described and figured in the following publication: Da Cunha, L., Fabre, P.-H. & Hautier, L. (2024) Springhares, flying and flightless scaly-tailed squirrels (Anomaluromorpha, Rodentia) are the squirrely mouse: comparative anatomy of the masticatory musculature and its implications on the evolution of hystricomorphy in rodents. Journal of Anatomy, 244, 900–928.
      

  Specimens
 
  M3 article infos

Published in Volume 10, issue 03 (2024)

PDF
CT scan data for the original holotype of Hamadasuchus rebouli Buffetaut 1994
Yohan Pochat-Cottilloux Logo, Joël Lachambre Logo, Romain Amiot Logo and Jeremy E. Martin Logo
Published online: 06/02/2024

Keywords: Crocodylomorpha; CT scan; Hamadasuchus; Kem Kem; Morocco

https://doi.org/10.18563/journal.m3.222

  Abstract

    The holotype of Hamadasuchus rebouli Buffetaut 1994 from the Kem Kem beds of Morocco (Late Albian – Cenomanian) consists of a left dentary which is limited, fragmentary and reconstructed in some areas. To aid in assessing if the original diagnosis can be considered as valid, the specimen was CT scanned for the first time. This is especially important to resolve the taxonomic status of certain specimens that have been assigned to Hamadasuchus rebouli since then. The reconstructed structures in this contribution are in agreement with the original description, notably in terms of alveolar count; thus the original diagnosis of this taxon remains valid and some specimens are not referable to H. rebouli anymore. 

  Specimens
 
  M3 article infos

Published in Volume 10, issue 01 (2024)

PDF
3D models related to the publication: The pharynx of the iconic stem-group chondrichthyan Acanthodes Agassiz, 1833 revisited with micro computed tomography.
Richard Dearden Logo, Anthony Herrel Logo and Alan Pradel Logo
Published online: 25/06/2024

Keywords: acanthodian; branchial skeleton; chondrichthyan; Permian; pharynx

https://doi.org/10.18563/journal.m3.226

  Abstract

    This contribution contains 3D models of the cranial endoskeleton of three specimens of the Permian ‘acanthodian’ stem-group chondrichthyan (cartilaginous fish) Acanthodes confusus, obtained using computed tomography. These datasets were described and analyzed in Dearden et al. (2024) “3D models related to the publication: The pharynx of the iconic stem-group chondrichthyan Acanthodes Agassiz, 1833 revisited with micro computed tomography.” Zoological Journal of the Linnean Society 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 02 (2024)

PDF
3D models related to the publication: The disappearing act of the magician tree snail: anatomy, distribution, and phylogenetic relationships of Drymaeus magus (Gastropoda: Bulimulidae), a long-lost species hidden in plain sight
Rafael Rosa Logo, Rodrigo Salvador Logo and Daniel Cavallari Logo
Published online: 27/03/2025

Keywords: CT-scan; internal anatomy; Mollusca; Orthalicoidea; Stylommatophora

https://doi.org/10.18563/journal.m3.249

  Abstract

    The present 3D dataset contains the 3D models analyzed in the publication: Rosa, R. M., Salvador, R. B., & Cavallari, D. C. (2025). The disappearing act of the magician tree snail: anatomy, distribution, and phylogenetic relationships of Drymaeus magus (Gastropoda: Bulimulidae), a long-lost species hidden in plain sight. Zoological Journal of the Linnean Society. 

  Specimens
 
  See original publication
  M3 article infos

Article state: in_press

PDF
3D models related to the skull of Miocaperea pulchra
Eli Amson Logo and Matthias Boller
Published online: 10/03/2025

Keywords: Cetotheriidae; Miocene; Neobalaeninae; Pisco Formation; Pygmy right whale

https://doi.org/10.18563/journal.m3.265

  Abstract

    The present 3D Dataset contains the 3D models of the skull of the holotype of Miocaperea pulchra.
      

  Specimens
 
  M3 article infos

Article state: in_press

PDF
A 3D geometric morphometric dataset quantifying skeletal variation in birds
Alexander Bjarnason Logo and Roger Benson Logo
Published online: 09/02/2021

Keywords: birds; geometric morphometrics; macroevolution; Morphology; skeleton

https://doi.org/10.18563/journal.m3.125

  Abstract

    Macroevolution is integral to understanding the patterns of the diversification of life. As the life sciences increasingly use big data approaches, large multivariate datasets are required to test fundamental macroevolutionary hypotheses. In vertebrate evolution, large datasets have been created to quantify morphological variation, largely focusing on particular areas of the skeleton. We provide a landmarking protocol to quantify morphological variation in skeletal elements across the head, trunk, hindlimb and forelimb using 3-dimensional landmarks and semilandmarks, and present a large pan-skeletal database of bird morphology for 149 taxa across avian phylogeny using CT scan data. This large collection of 3D models and geometric morphometric data is open access and can be used in the future for new research, teaching and outreach. The 3D models and CT scans of the 149 specimens related to this project can be downloaded at MorphoSource (https://www.morphosource.org/projects/00000C420

  Specimens
 
  M3 article infos

Published in Volume 07, issue 01 (2021)

PDF
S.I. Data
3D models related to the publication: Late middle Miocene caviomorph rodents from Tarapoto, Peruvian Amazonia.
Myriam Boivin Logo, Laurent Marivaux Logo, Rodolfo Salas-Gismondi Logo and Pierre-Olivier Antoine Logo
Published online: 08/03/2023

Keywords: Caviomorpha; Laventan; Paleobiogeography; Peru; Systematics

https://doi.org/10.18563/journal.m3.189

  Abstract

    This contribution contains the three-dimensional digital models of a part of the dental fossil material (the large specimens) of caviomorph rodents, discovered in late middle Miocene detrital deposits of the TAR-31 locality in Peruvian Amazonia (San Martín, Peru). These fossils were described, figured and discussed in the following publication: Boivin, Marivaux et al. (2021), Late middle Miocene caviomorph rodents from Tarapoto, Peruvian Amazonia. PLoS ONE 16(11): e0258455. https://doi.org/10.1371/journal.pone.0258455
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 01 (2023)

PDF
A 3D reconstruction of the skull of the West Indian Ocean coelacanth Latimeria chalumnae
 
Luigi Manuelli, Raphael Covain Logo and Lionel Cavin Logo
Published online: 14/09/2023

Keywords: coelacanth; Computed Tomography; Cranial osteology; Latimeria

https://doi.org/10.18563/journal.m3.211

  Abstract

    We provide a 3D reconstruction of the skull of Latimeria chalumnae that can be easily accessed and visualized for a better understanding of its cranial anatomy. Different skeletal elements are saved as separate PLY files that can be combined to visualize the entire skull or isolated to virtually dissect the skull. We included some guidelines for a fast and easy visualization of the 3D skull. 

  Specimens
 
  M3 article infos

Published in Volume 09, issue 03 (2023)

PDF
3D model related to the publication: The largest freshwater odontocete: a South Asian river dolphin relative from the Proto-Amazonia
Aldo Benites-Palomino Logo, Gabriel Aguirre-Fernández Logo, Patrice Baby, Diana Ochoa Logo, Ali Altamirano-Sierra Logo, John J. Flynn Logo, Marcelo R. Sánchez-Villagra Logo, Julia Tejeda Logo, Christian de Muizon Logo and Rodolfo Salas-Gismondi Logo
Published online: 21/03/2024

Keywords: Miocene; Odontoceti; Platanistidae; River dolphin

https://doi.org/10.18563/journal.m3.221

  Abstract

    The present 3D Dataset contains the 3D model analyzed in The largest freshwater odontocete: a South Asian river dolphin relative from the Proto-Amazonia. 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 01 (2024)

PDF
3D models related to the publication: Inner ear morphology in wild vs laboratory house mice
Sabrina Renaud Logo, Léa Amar, Caroline Romestaing Logo, Jean-Pierre Quéré and Renaud Lebrun Logo
Published online: 15/01/2024

Keywords: fuctuating asymmetry; geometric morphometrics; intraspecific variation; Mus musculus domesticus; semicircular canals

https://doi.org/10.18563/journal.m3.220

  Abstract

    This contribution contains 3D models of left and right house mouse (Mus musculus domesticus) inner ears analyzed in Renaud et al. (2024). The studied mice belong to four groups: wild-trapped mice, wild-derived lab offspring, a typical laboratory strain (Swiss) and hybrids between wild-derived and Swiss mice. They have been analyzed to assess the impact of mobility reduction on inner ear morphology, including patterns of divergence, levels of inter-individual variance (disparity) and intra-individual variance (fluctuating asymmetry) 

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 10, issue 01 (2024)

PDF
3D model related to the publication: An eosimiid primate of South Asian affinities in the Paleogene of Western Amazonia and the origin of New World monkeys
Laurent Marivaux Logo, Francisco R. Negri Logo and Ana M. Ribeiro Logo
Published online: 04/07/2023

Keywords: Brazilian Amazonia; early Anthropoidea; Eosimiidae; Paleobiogeography; Platyrrhini

https://doi.org/10.18563/journal.m3.188

  Abstract

    This contribution contains the three-dimensional digital model of one isolated fossil tooth of an anthropoid primate (Ashaninkacebus simpsoni), discovered in sedimentary deposits located on the upper Rio Juruá in State of Acre, Brazil (Western Amazonia). This fossil was described, figured and discussed in the following publication: Marivaux et al. (2023), An eosimiid primate of South Asian affinities in the Paleogene of Western Amazonia and the origin of New World monkeys. Proceedings of the National Academy of Sciences USA. https://doi.org/10.1073/pnas.2301338120  
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 03 (2023)

PDF
3D models related to the publication: Unexpected pampatheriid from the early Oligocene of Peruvian Amazonia: insights into the tropical differentiation of cingulate xenarthrans.
François Pujos Logo, Lionel Hautier Logo, Pierre-Olivier Antoine Logo, Myriam Boivin Logo, Benoit Moison Logo, Rodolfo Salas-Gismondi Logo, Juila V. Tejada Logo, Rafael M. Varas-Malca Logo, Johan Yans Logo and Laurent Marivaux Logo
Published online: 28/03/2025

Keywords: dentinal microstructure; Palaeogene; Pampatheriidae; Peru; Xenarthra

https://doi.org/10.18563/journal.m3.251

  Abstract

    This contribution contains the 3D models described and figured in the following publication: Pujos F., Hautier L., Antoine P-O., Boivin M., Moison B, Salas-Gismondi R, Tejada J.V. , Varas-Malca R.M., Yans J., Marivaux L. (2025). Unexpected pampatheriid from the early Oligocene of Peruvian Amazonia: insights into the tropical differentiation of cingulate xenarthrans. Historical Biology. 

  Specimens
 
  See original publication
  M3 article infos

Article state: in_press

PDF
3D model related to the publication: A find from the Ladakh Himalaya reveals a survival of madtsoiid snakes (Serpentes, Madtsoiidae) in India through the Late Oligocene
Wasim A. Wazir Logo, Rajeev Patnaik Logo, Ramesh K. Sehgal, Navin Kumar, Rohit Kumar, Ningthoujam P. Singh, Mohd A. Wazir and Deepak Choudhary
Published online: 24/04/2025

Keywords: Himalaya; Ladakh Molasse; Oligocene; Snake; Vertebra

https://doi.org/10.18563/journal.m3.271

  Abstract

    The present 3D Dataset contains the 3D model analyzed in Wazir, W. A., Sehgal, R. K., Čerňanský, A., Patnaik, R., Kumar, N., Singh, A. P. and Singh, N. P. 2022. A find from the Ladakh Himalaya reveals a survival of madtsoiid snakes (Serpentes, Madtsoiidae) in India through the late Oligocene. Journal of Vertebrate Paleontology, 41(6), e2058401. https://doi.org/10.1080/02724634.2021.2058401
      

  Specimens
 
  M3 article infos

Article state: in_press

PDF
3D models related to the publication: Convergent allometric trajectories in Devonian-Carboniferous unornamented Polygnathus conodonts
Félix Nesme Logo, Catherine Girard, Carlo Corradini Logo and Sabrina Renaud Logo
Published online: 25/04/2025

Keywords: Allometry; Bilateral asymmetry; Geometric morphometrics; Occlusion

https://doi.org/10.18563/journal.m3.254

  Abstract

    The present 3D Dataset contains sixteen 3D models of unornamented Polygnathus illustrating allometric variation and bilateral asymmetry within four “Operational Taxonomic Units” analyzed in the publication: Convergent allometric trajectories in Devonian-Carboniferous unornamented Polygnathus conodonts. 

  Specimens
 
  See original publication
  M3 article infos

Article state: in_press

PDF
The petrosal bone of Prodremotherium sp. (Artiodactyla, Ruminantia).
Alexandre Assemat Logo and Nicolas L. M. Brualla Logo
Published online: 13/02/2015

Keywords: Late Oligocene; MP 26; MP 28; periotic bone; ruminant

https://doi.org/10.18563/m3.1.2.e1

  Abstract

    This project presents the 3D models of two isolated petrosals from the Oligocene locality of Pech de Fraysse (Quercy, France) here attributed to the genus Prodremotherium Filhol, 1877. Our aim is to describe the petrosal morphology of this Oligocene “early ruminant” as only few data are available in the literature for Oligocene taxa. 

  Specimens
 
  M3 article infos

Published in Vol. 01, Issue 02 (2015)

PDF
Skeletogenesis during the late embryonic development of the catshark Scyliorhinus canicula (Chondrichthyes; Neoselachii)
Sébastien Enault, Sylvain Adnet Logo and Mélanie Debiais-Thibaud Logo
Published online: 25/04/2016

Keywords: Chondrichthyes; development; mineralization; Scyliorhinus canicula; skeleton

https://doi.org/10.18563/m3.1.4.e2

  Abstract

    Current knowledge on the skeletogenesis of Chondrichthyes is scarce compared with their extant sister group, the bony fishes. Most of the previously described developmental tables in Chondrichthyes have focused on embryonic external morphology only. Due to its small body size and relative simplicity to raise eggs in laboratory conditions, the small-spotted catshark Scyliorhinus canicula has emerged as a reference species to describe developmental mechanisms in the Chondrichthyes lineage. Here we investigate the dynamic of mineralization in a set of six embryonic specimens using X-ray microtomography and describe the developing units of both the dermal skeleton (teeth and dermal scales) and endoskeleton (vertebral axis). This preliminary data on skeletogenesis in the catshark sets the first bases to a more complete investigation of the skeletal developmental in Chondrichthyes. It should provide comparison points with data known in osteichthyans and could thus be used in the broader context of gnathostome skeletal evolution. 

  Specimens
 
  M3 article infos

Published in Volume 01, Issue 04 (2016)

PDF
3D models related to the publication: First Eocene–Miocene anuran fossils from Peruvian Amazonia: insights into Neotropical frog evolution and diversity
Olivier Jansen Logo, Raúl O. Gómez Logo, Antoine Fouquet Logo, Laurent Marivaux Logo, Rodolfo Salas-Gismondi Logo and Pierre-Olivier Antoine Logo
Published online: 22/12/2023

Keywords: Amazonia; Anura; Brachycephaloidea; Cenozoic; Pipidae

https://doi.org/10.18563/journal.m3.210

  Abstract

    The present contribution contains the 3D models of fossil humeri and ilia of anurans from various Eocene-Miocene deposits of Peruvian Amazonia. These fossils were described and figured in the following publication: Jansen et al. (2023), First Eocene–Miocene anuran fossils from Peruvian Amazonia: insights into Neotropical frog evolution and diversity. Papers in Palaeontology, The Palaeontological Association.
     
      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 04 (2023)

PDF
3D models related to the publication: The inner ear of caviomorph rodents: phylogenetic implications and application to extinct West Indian taxa.
Léa Da Cunha Logo, Lázaro W. Viñola López Logo, Ross D. E. MacPhee, Leonardo Kerber Logo, Jorge Velez-Juarbe Logo, Pierre-Olivier Antoine Logo, Myriam Boivin Logo, Lionel Hautier Logo, Renaud Lebrun Logo, Laurent Marivaux Logo and Pierre-Henri Fabre Logo
Published online: 31/10/2023

Keywords: fossils; Heptaxodontidae; inner ear; rodents; West Indies

https://doi.org/10.18563/journal.m3.196

  Abstract

    This contribution contains the three-dimensional models of the inner ear of the hetaxodontid rodents Amblyrhiza, Clidomys and Elasmodontomys from the West Indies. These specimens were analyzed and discussed in : The inner ear of caviomorph rodents: phylogenetic implications and application to extinct West Indian taxa.

      

  Specimens
 
  See original publication
  M3 article infos

Published in Volume 09, issue 04 (2023)

PDF
3D models related to the publication: The late middle Miocene Mae Moh Basin of northern Thailand: the richest Neogene assemblage of Carnivora from Southeast Asia and a paleobiogeographic analysis of Miocene Asian carnivorans
Camille Grohé Logo, Louis de Bonis Logo, Yaowalak Chaimanee, Jérôme Surault Logo and Jean-Jacques Jaeger Logo
Published online: 03/06/2020

Keywords: Carnivora; Mustelidae; otters; skull; upper teeth

https://doi.org/10.18563/journal.m3.109

  Abstract

    The present 3D Dataset contains the 3D models described and figured in the following publication: Grohé C., Bonis L. de, Chaimanee Y., Chavasseau O., Rugbumrung M., Yamee C., Suraprasit K., Gibert C., Surault J., Blondel C., Jaeger J.-J. 2020. The late middle Miocene Mae Moh Basin of northern Thailand: the richest Neogene assemblage of Carnivora from Southeast Asia and a paleobiogeographic analysis of Miocene Asian carnivorans. American Museum Novitates. http://digitallibrary.amnh.org/handle/2246/7223 

  Specimens

    Siamogale bounosa MM-54 View specimen

    M3#505

    3D model of the skull of Siamogale bounosa The zip file contains: - the 3D surface in PLY - the orientation files in .pos and .ori - the project in .ntw

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.505   state:published




    Download 3D surface file

    Vishnuonyx maemohensis MM-78 View specimen

    M3#506

    3D model of the skull of Vishnuonyx maemohensis The zip file contains: - the 3D surface in PLY - the orientation files in .pos and .ori - the project in .ntw

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.506   state:published




    Download 3D surface file

    M3#507

    3D model of the reconstructed upper teeth of Vishnuonyx maemohensis The zip file contains: - the 3D surface in PLY - the orientation files in .pos and .ori - the project in .ntw

    Type: "3D_surfaces"

    doi: 10.18563/m3.sf.507   state:published




    Download 3D surface file


 
  M3 article infos

Published in Volume 06, issue 03 (2020)

PDF

Page 2 of 10, showing 20 record(s) out of 190 total